By Joe Wallis
The first thing that you should do whenever you are going to install a new set of tiles on the floor of any room in the house is to take out the worn-out tiles prior to beginning with the installation. Another suggestion is for you to inquire from professionals and ask them for advice or to research about it before you begin working, similar to other kinds of renovation work. Even as a number of people will not find it difficult to remove tiles, you would not know what to do until you will be able to consult an expert. You will be able to do a satisfactory job in taking out the tiles provided that you stick to the procedures in this article on what you need to do when you are removing tiles.
Since a number of rooms inside the house are used more often compared to others, they are often worn out faster than the others especially with the way they are used. Among the rooms that often have badly worn out floors are the bathroom and the kitchen. You may have to install brand new and elegant tiles to replace the ones that already look old and worn out. Even though it may not sound easy to do and may take a long time to finish, you might as well work on it if you have a couple of weekends available to work on it since you will reap the rewards of your hard work later on. Even if the adhesive that was used in installing the tiles are heavy duty, the equipment that you will use in removing the tiles will be suitable enough for the job.
The image of yourself on the floor struggling to remove each and every tile on the floor may have crossed your mind. But the good news is that image in your mind is not accurate since the procedure in taking out the tile will not take forever to do. I also experienced the sense of relief after learning that it will not be necessary to stay on the floor for a number of hours just to remove worn out tiles. Safety will always be the foremost concern whenever you want to remove the tiles. Have your gloves and goggles ready due to the dust and dirt particles that might fly off when you know how to take out the worn-out tiles on the floor.
If you are fascinated by the demolition and wrecking of things, you will find the next step fun to do. Simply get a hammer and start smashing the tiles one at a time. Try to control yourself since things can easily go wrong, however be confident enough to enjoy yourself during the job, As soon as the tiles are destroyed and smashed into smaller pieces use a power scraper with a long handle to sweep the floor. You will be able to take out any of the extra bits wedged against the floorboard using the tool as a broom. Once this is done, take all the large and tiny pieces of tiles out of the room and vacuum it to remove the dust particles from of the room. With this you should already know how to properly remove worn-out tiles from the room.