Here is a great article on cleaning hardwood floors, maintenance and general information and tricks on making your San Francisco Bay Area hardwood flooring last a lifetime…

READ MORE

Bookmark and Share

By R. Levi

Hardwood flooring gives a home that warm welcoming look that makes you feel so, well warm and welcome. The good news is hardwood floors are also straightforward to clean and to take care of using eco-friendly cleaners.

Before you begin to clean your hardwood floors, you have to determine what condition your ground is in. You will need to perceive what sort of finish you’ve gotten in place and whether or not it’s stained or varnished. Many so called ‘wood floors’ are really just wood grain laminate, which might require a different kind of cleaning.

Before you start cleaning the hardwood floor do this test – sprinkle a little water on the floor. If the ground soaks up the water, it means the protecting finish has worn away and it’s time for you to think about redoing your floors.

When you have a wax finish on your flooring, then you only have to sweep the ground with a broom and mop it with a clean soft mop. You will need to sweep this type of hardwood floor each day to forestall dirt from building up, which can scratch and mar the wax surface. Liquid spills should be wiped up immediately to prevent the formation of ugly water rings.

A few times a year it’s best to consider using beeswax to scrub the ground if it has an oil or wax based finish. This kind of cleaner can help you to clean your floor and keep it vivid and beautiful. It’s best to apply the wax with a delicate cloth. Permit it to sit for a couple of minutes and then start to remove the excess wax. It is a lot like waxing your car. It’d sound extravagant to make use of this sort of wax however it may save you quite a lot of time when it comes time to day by day cleanup of the hardwood floors.

To really go green when cleaning hardwood flooring, you could have to remove the finish on your hardwood floor. This may need sanding the ground, which will be slightly difficult to accomplish on your own so that you would possibly have to get a professional to help you out. Once you have the floor stripped, reseal the ground with beeswax. Your newly polished hardwood flooring can now be kept clean by sweeping it every day with a brush and dusting with a gentle mop.

We trust that you find this content on cleaning hardwood floors worthwhile. For more information on cleaning hardwood floors, hardwood floor cleaning, hardwood floors cleaning, how to clean hardwood floors, clean hardwood floors, I suggest you visit this site http://www.cleaningcleaner.com.

About the author:
R. Levi is an expert in when comes to Eco Friendly Cleaning. He has devoted so much time in doing researches on the topic and has been proudly living Green for several years now. To learn more about cleaning hardwood floors, please drop by R. Levi’s favorite internet resource, http://www.cleaningcleaner.com.

Want a kitchen remodeling project this summer?
by Sears Home Pro

Bookmark and Share

Kitchen remodeling is a fun and interesting experience, and the outcome should please you for years to come. When you get ready to do the job, consider carefully whether you have the skills and experience to complete it. Here are some remodeling tips to think about before you take on this huge challenge.
1. Expertise is helpful in designing any size kitchen.
A medium sized kitchen is probably the easiest to design. You have basic features to incorporate into the plan, and you have plenty of room for them. With help you can design a lovely new kitchen room. A large kitchen takes more thought because you have many more options. If you are not familiar with all the different types of cabinets, countertops, and appliances and how to fit them together, you might sell this large space short. A small kitchen is perhaps the most difficult of all for designing a remodel. To get the most out of every inch of the space, it is a good idea to use an experienced contractor who has worked with small kitchens before.
2. Initial choices affect overall cost.
One of the most basic choices is to what degree you are going to take the kitchen remodeling job. You will have to decide whether to get new custom cabinets, new pre-manufactured cabinets, or reface the old ones. The next decisions are materials for every part of your newly remodeled kitchen. Countertop materials include ceramic tile, granite, marble, laminate, solid surface, engineered stone and butchers block wood countertops. Cabinet choices range from hardwoods to melamine. Be sure you get the quality of materials you want. The best way to ensure this is to have a discussion with an expert.
3. Measure carefully.
When you are doing an entire kitchen remodeling project, you will have to measure every part of your kitchen. Make sure to consider the way the work will be done as you measure each area and board. Then, write down every measurement in a way that you will recognize when it comes time to order the parts and put them together. This can be a very confusing task if you are not accustomed to doing it.
4. Be careful in placing appliances.
If the stove and refrigerator are not separated when you begin your kitchen remodeling project, make plans to separate them at that point. There should be plenty of counter space between the two so that you will have places to put food when you take it out of either appliance. The sink, ideally, should be between the two. This may require special plumbing work as a part of the job. When you are getting ready for a kitchen remodeling job, there are many things to consider. Make sure you keep them in mind.

About the Author:

This article brought to you by Yil Acosta of Sears Home Improvements. To get more roofing information including Cost of A New Roof visit the Roofing Services section of our website or call us today at 877-292-7894

Garage Floor Drains Provide Simple Way To Protect Your Belongings
by Alexander Sutton

Bookmark and Share
Garage Floor Drains

Garage Floor Drains

How important is the garage to you and your family? Is it a natural part of your house or was it an added feature similar to a second thought? No matter how you use the room, it needs a garage floor drain. You may only use it as a place where you park your car but many people use it as a storage area. The garage can be a catch all room for keeping things that you do not have a need for everyday or for storing items that you want to give away, sell, or throw away of later on at a rummage or tag sale. Sporting equipment and other outside toys are usually stored in the garage. Also, there may be many families that use the garage as a laundry area or a workshop or maybe even as a business or home office.

The growing importance of the garage has increased the number of remodeled garages through the past years. Garages are becoming an integral part of the house. Garage floor drains should be installed in the middle of the floor, close to a water heater, near a washing machine, or beside the utility sink. If you have a rest room in your garage, you will need a garage floor drain there as well.

Making the decision of what type of flooring to go with in your garage can be a challenge. You have many choices to choose from that means you are not limited to just concrete anymore. There are just about as many choices in flooring and styles as there are choices in women’s purses. Make sure you are keeping your floors clean and well maintained to keep from having to replace them often. Decide what is most important to you about your floor and then choose the material that best matches those requirements. In no time at all you will have the flooring for your garage.

If you have the financial ability to afford them, tile floors are another great option. Tile is not the cheapest option, so if you are on a budget you might want to think about other flooring. You will find installation fairly simple because of the size of the tiles. Installing them yourself will save you a bit of money. Most people who choose tile end up installing it in multiple areas of their homes.

About the Author:

Alexander Sutton enjoys providing a convenient experience for others by helping people learn about top features and industry-best trends. For more information, please visit Garage Floor Drains.

Bookmark and Share

Water Damage Inspection for Kitchens
by Ashley Ford

Despite being one of the most frequently used and cleaned rooms in your home, a kitchen is quite often overlooked when it comes to signs of excessive moisture and impending water damage. Keep an eye on these high-risk areas of your kitchen to help prevent damage from water or the need for mold remediation.

Refrigerator

The area behind the refrigerator is hard to reach and therefore is rarely ever inspected. Periodic inspections will help to greatly lower any chances of water related issues.

If there is moisture behind your refrigerator is a major sign of a problem. Any signs of moisture or leaks should be repaired as soon as possible. Hire a repair technician if you have problems making the repairs. Be sure to clean any mold that may have grown or spread underneath the refrigerator too.

Check the hose of your refrigerators icemaker to be sure that it is properly sealed and securely attached to the water supply line. Consider installing a steel-braided hose for longer life.

Check to see if your refrigerator has a drain pan. If it does be sure to check the pan often to be sure it is clean.

Cooking Range

The cooking range is one of the most popularly overlooked areas of the kitchen since it is not directly related to water.

However, it is important to inspect your stove for any signs of water or moisture. If you do find any water or moisture, be sure to thoroughly dry and clean the area. Make it a priority to locate the source of water or moisture and make any necessary repairs.

Exhaust Fans

Exhaust fans help to maintain a low humidity level.

Be sure to clean exhaust fan filters regularly to help prevent dust and the accumulation of mold. This helps to ensure smooth air circulation and adequate ventilation. Check the exhaust fan to make sure it is operating properly.

Helpful Tips for Water Prevention in the Kitchen

Make sure the refrigerator is clean behind and underneath.
Refrigerator coils should also be vacuumed.
Make sure the area under the stove is also clean.

About the Author:

For help with preventing water damage, Able Restoration is the place to go for help. With years and years of experience, Able Restoration is an expert when it comes to San Diego water damage, Riverside County water damage and water damage Orange County and even mold remediation. Call them 24 hours a day and 7 days a week at 1-800-696-6676

Bookmark and Share

Ceiling Tiles

Whether you are planning on tiling awkward sloping ceilings or have decided on having a tiled ceiling design, there are many tiles in which to choose from for ceilings. Ceramic Tiles are ideal for ceilings and will add a finished and smooth appearance; the one advantage of ceiling tiles is an overall smooth finish that if done properly, will last the test of time.

Years ago tiles used on the ceiling were incredibly popular and fashionable and it was common place to have ceiling tiles especially in the kitchen, this trend began to fade some years ago but ceiling tiles are now having a revolution as they once again become fashionable. The advantages of ceiling tiles is that they give such a brilliant finish and many tiles can be repainted very easily making remodelling or redecorating very simple.

Drop ceilings as they are called are additional ceilings installed over existing ceilings and more home owners are opting to make real focal points of drop ceilings by installing mood lights and tiling. There are many different tile materials which can be used for drop ceiling, ceramic are a real favourite, stone tiles and plastic are also ideal for drop ceilings.

Many home owners opt for ceiling tiles in bathrooms especially if ventilation is limited, tiling ceiling areas can limit the damage from mould, steam and moisture and they are very easy to clean. Tiles on the ceiling also add to the elegance and style of any bathroom with a wide range of colours, designs and styles available. Shower areas are another ideal place for ceiling tiles and because it is a relatively small space, this is a good place to experiment with design styles. A decorative design choice is to use the same uniformed colours on the floor and ceiling of the shower with a different colour on the side walls which will compliment the floor and ceilings.

If ceiling tiles are used in the bathroom area they will almost certainly have to be sealed to prevent them from absorbing water and moisture. The kitchen area also will require the tiles to be sealed and this way your tiles will not become damaged and will last the test of time.

There are many tile options when it comes to ceiling tiles and you first need to establish your budget before deciding on what tiles you want. Many tiles companies are more than happy to discuss options available and give you any more information you may need.

About The Author:

Tile choice offer a wide variety of Tile choice for the walls and floors, we also offer advice and information on Tiles and Tiling. http://www.tilechoice.co.uk

Bookmark and Share

Any competent home handyman can install sheet vinyl flooring. Vinyl flooring is an excellent choice for kitchens, bathrooms, entryways, and sunrooms. It resists water and provides much more comfort to the feet, calves, and ankles than ceramic, natural stone, hardwood or laminate flooring. You can easily update your entire room by installing new vinyl flooring. If the area is large, it is wise to have a helper to assist in moving and placing the sheet vinyl into position.

Required Tools:

  • Tape Measure
  • Trowel
  • Straight Edge
  • Utility Knife
  • Floor Roller (rent)

Step 1

Measure The Floor Area: Sheet vinyl is sold in standard widths of 6′, 12′ and 15′, with the most common being 12′. The most difficult part of any sheet vinyl installation is seaming – joining 2 pieces together. If possible, buy a large enough width to avoid having to seam pieces together.

Step 2

Prepare The Room:

  • Remove all furniture, appliances, floor ventilation grills and the toilet if applicable
  • Remove all doors
  • Remove any baseboard or other floor trim moldings. Check the wall for any nails that may have pulled through the molding during removal. Remove these nails from the wall.
  • Vacuum the area, paying special attention to areas that were previously covered by the baseboard

Step 3

Prepare The Sub-Floor:

  • Concrete — To install sheet vinyl over concrete you must insure that the surface is dry, smooth and clean. All holes and cracks must be repaired using concrete filler. Grinders can be used to shave high spots.
  • Vinyl Flooring — You can install new sheet vinyl over old sheet vinyl or linoleum providing that the existing material is in reasonably good condition. Embossing leveler can be applied with a straight edge trowel to smooth rough textures. Remove any damaged or loose vinyl flooring.
  • Floors Requiring Underlayment — In order to install vinyl sheet flooring over hardwood, embossed, cushioned, or an uneven floor you will first have to install an underlayment. It is important to note that any bumps or dips in the floor will, over time, show through the new floor. A ¼” BC plywood is a suitable underlayment for vinyl sheeting (check local codes). Always use a plywood that is of underlayment grade.

Step 4

Cutting The Vinyl: The new vinyl flooring must be allowed to acclimatize in the room where it will be installed for at least 24 hours prior to doing any cutting or installation of the product.

Sheet vinyl can be measured and cut to size using 2 different methods:

  • Measure the length and width of the floor to be covered. Proceed by cutting the sheet vinyl 3″ wider than the floor area on all sides. Lay the sheet vinyl on the floor to be covered and trim the excess material away. If your room has few angles and/or obstacles you will find that this method is the easiest to implement.
  • Create an exact pattern of the floor layout. Transfer the layout from the pattern to the vinyl and make the necessary cuts prior to laying it in place. This method works well with thicker vinyl flooring and/or in rooms that have a complex set of angles or recesses. Most retailers that sell sheet vinyl will have installation kits that contain paper, marking pen, tape, cutting blade, and a complete set of instructions to make an accurate template.

Step 5

Installing Your Vinyl Flooring:

Depending on the type of sheet vinyl you have purchased it will require either a full-bond or a perimeter-bond adhesive. There are different adhesives depending on the type of sheet vinyl that you are installing. Make sure that you have the correct adhesive for your product.

For additional information on flooring products for your home or other home renovation, landscaping and gardening projects, visit Renovation Headquarters.

Bill Prudehome has more than 25 years experience in home improvement, remodel and landscaping. Through his website – Renovation-Headquarters.com he provides a wealth of information on all aspects of home improvement, remodel and landscaping.

Follow

Get every new post delivered to your Inbox.

Join 58 other followers