Here is a great article on cleaning hardwood floors, maintenance and general information and tricks on making your San Francisco Bay Area hardwood flooring last a lifetime…
Leave a Comment
By R. Levi
Hardwood flooring gives a home that warm welcoming look that makes you feel so, well warm and welcome. The good news is hardwood floors are also straightforward to clean and to take care of using eco-friendly cleaners.
Before you begin to clean your hardwood floors, you have to determine what condition your ground is in. You will need to perceive what sort of finish you’ve gotten in place and whether or not it’s stained or varnished. Many so called ‘wood floors’ are really just wood grain laminate, which might require a different kind of cleaning.
Before you start cleaning the hardwood floor do this test – sprinkle a little water on the floor. If the ground soaks up the water, it means the protecting finish has worn away and it’s time for you to think about redoing your floors.
When you have a wax finish on your flooring, then you only have to sweep the ground with a broom and mop it with a clean soft mop. You will need to sweep this type of hardwood floor each day to forestall dirt from building up, which can scratch and mar the wax surface. Liquid spills should be wiped up immediately to prevent the formation of ugly water rings.
A few times a year it’s best to consider using beeswax to scrub the ground if it has an oil or wax based finish. This kind of cleaner can help you to clean your floor and keep it vivid and beautiful. It’s best to apply the wax with a delicate cloth. Permit it to sit for a couple of minutes and then start to remove the excess wax. It is a lot like waxing your car. It’d sound extravagant to make use of this sort of wax however it may save you quite a lot of time when it comes time to day by day cleanup of the hardwood floors.
To really go green when cleaning hardwood flooring, you could have to remove the finish on your hardwood floor. This may need sanding the ground, which will be slightly difficult to accomplish on your own so that you would possibly have to get a professional to help you out. Once you have the floor stripped, reseal the ground with beeswax. Your newly polished hardwood flooring can now be kept clean by sweeping it every day with a brush and dusting with a gentle mop.
We trust that you find this content on cleaning hardwood floors worthwhile. For more information on cleaning hardwood floors, hardwood floor cleaning, hardwood floors cleaning, how to clean hardwood floors, clean hardwood floors, I suggest you visit this site http://www.cleaningcleaner.com.
About the author:
R. Levi is an expert in when comes to Eco Friendly Cleaning. He has devoted so much time in doing researches on the topic and has been proudly living Green for several years now. To learn more about cleaning hardwood floors, please drop by R. Levi’s favorite internet resource, http://www.cleaningcleaner.com.
Water Damage Inspection for Kitchens
by Ashley Ford
Despite being one of the most frequently used and cleaned rooms in your home, a kitchen is quite often overlooked when it comes to signs of excessive moisture and impending water damage. Keep an eye on these high-risk areas of your kitchen to help prevent damage from water or the need for mold remediation.
The area behind the refrigerator is hard to reach and therefore is rarely ever inspected. Periodic inspections will help to greatly lower any chances of water related issues.
If there is moisture behind your refrigerator is a major sign of a problem. Any signs of moisture or leaks should be repaired as soon as possible. Hire a repair technician if you have problems making the repairs. Be sure to clean any mold that may have grown or spread underneath the refrigerator too.
Check the hose of your refrigerators icemaker to be sure that it is properly sealed and securely attached to the water supply line. Consider installing a steel-braided hose for longer life.
Check to see if your refrigerator has a drain pan. If it does be sure to check the pan often to be sure it is clean.
The cooking range is one of the most popularly overlooked areas of the kitchen since it is not directly related to water.
However, it is important to inspect your stove for any signs of water or moisture. If you do find any water or moisture, be sure to thoroughly dry and clean the area. Make it a priority to locate the source of water or moisture and make any necessary repairs.
Exhaust fans help to maintain a low humidity level.
Be sure to clean exhaust fan filters regularly to help prevent dust and the accumulation of mold. This helps to ensure smooth air circulation and adequate ventilation. Check the exhaust fan to make sure it is operating properly.
Helpful Tips for Water Prevention in the Kitchen
Make sure the refrigerator is clean behind and underneath.
Refrigerator coils should also be vacuumed.
Make sure the area under the stove is also clean.
About the Author:
For help with preventing water damage, Able Restoration is the place to go for help. With years and years of experience, Able Restoration is an expert when it comes to San Diego water damage, Riverside County water damage and water damage Orange County and even mold remediation. Call them 24 hours a day and 7 days a week at 1-800-696-6676
Any competent home handyman can install sheet vinyl flooring. Vinyl flooring is an excellent choice for kitchens, bathrooms, entryways, and sunrooms. It resists water and provides much more comfort to the feet, calves, and ankles than ceramic, natural stone, hardwood or laminate flooring. You can easily update your entire room by installing new vinyl flooring. If the area is large, it is wise to have a helper to assist in moving and placing the sheet vinyl into position.
- Tape Measure
- Straight Edge
- Utility Knife
- Floor Roller (rent)
Measure The Floor Area: Sheet vinyl is sold in standard widths of 6′, 12′ and 15′, with the most common being 12′. The most difficult part of any sheet vinyl installation is seaming – joining 2 pieces together. If possible, buy a large enough width to avoid having to seam pieces together.
Prepare The Room:
- Remove all furniture, appliances, floor ventilation grills and the toilet if applicable
- Remove all doors
- Remove any baseboard or other floor trim moldings. Check the wall for any nails that may have pulled through the molding during removal. Remove these nails from the wall.
- Vacuum the area, paying special attention to areas that were previously covered by the baseboard
Prepare The Sub-Floor:
- Concrete — To install sheet vinyl over concrete you must insure that the surface is dry, smooth and clean. All holes and cracks must be repaired using concrete filler. Grinders can be used to shave high spots.
- Vinyl Flooring — You can install new sheet vinyl over old sheet vinyl or linoleum providing that the existing material is in reasonably good condition. Embossing leveler can be applied with a straight edge trowel to smooth rough textures. Remove any damaged or loose vinyl flooring.
- Floors Requiring Underlayment — In order to install vinyl sheet flooring over hardwood, embossed, cushioned, or an uneven floor you will first have to install an underlayment. It is important to note that any bumps or dips in the floor will, over time, show through the new floor. A Â¼” BC plywood is a suitable underlayment for vinyl sheeting (check local codes). Always use a plywood that is of underlayment grade.
Cutting The Vinyl: The new vinyl flooring must be allowed to acclimatize in the room where it will be installed for at least 24 hours prior to doing any cutting or installation of the product.
Sheet vinyl can be measured and cut to size using 2 different methods:
- Measure the length and width of the floor to be covered. Proceed by cutting the sheet vinyl 3″ wider than the floor area on all sides. Lay the sheet vinyl on the floor to be covered and trim the excess material away. If your room has few angles and/or obstacles you will find that this method is the easiest to implement.
- Create an exact pattern of the floor layout. Transfer the layout from the pattern to the vinyl and make the necessary cuts prior to laying it in place. This method works well with thicker vinyl flooring and/or in rooms that have a complex set of angles or recesses. Most retailers that sell sheet vinyl will have installation kits that contain paper, marking pen, tape, cutting blade, and a complete set of instructions to make an accurate template.
Installing Your Vinyl Flooring:
Depending on the type of sheet vinyl you have purchased it will require either a full-bond or a perimeter-bond adhesive. There are different adhesives depending on the type of sheet vinyl that you are installing. Make sure that you have the correct adhesive for your product.
For additional information on flooring products for your home or other home renovation, landscaping and gardening projects, visit Renovation Headquarters.
Bill Prudehome has more than 25 years experience in home improvement, remodel and landscaping. Through his website – Renovation-Headquarters.com he provides a wealth of information on all aspects of home improvement, remodel and landscaping.
Carpet and Rug Cleaning Tips By Chris Thomas
Like everything else today, rugs and carpets need special care to ensure long life. Regular cleaning, using proper treatments will help extend the life of your valuable investments like rug and carpets.
Before shampooing a carpet, vacuum it thoroughly to remove grit, dust and crumbs. Move the furniture out of the room or stack it at one end. Choose a day when you can open the windows to let the carpets dry naturally. Use a special carpet shampoo and follow the manufacturer’s instructions.
Always check first that the color will not run by rubbing an unobtrusive area with shampoo solution. Start at the corner of the room furthest from the door and work back across the room to avoid treading on the damp area. Cover an area of approximately 1 square yd at a time, drawing the brush head of the cleaner towards you in strips across the area until no more water is drawn back into the head. Allow the carpet to dry thoroughly before replacing furniture.
Regardless of whether your rug is a cut pile or loop rug, vacuuming is the basic and primary step for caring for your rug. Rugs are exposed to endless mistreatment, such as treading feet, dirt, dust, oil and spills of all sorts. By frequently vacuuming, you can prevent soils from building up. Vacuums with good suction are recommended to lift surface dirt. This especially applies to looped rugs where damaging the loops is possible. Cut pile rugs on the other hand, require rougher treatment. Besides removing surface dirt it is necessary to agitate the pile to loosen the dirt which may have sunk to the core. These rugs require a vacuum with a beater or brush bar to lift the residue embedded in the rug. While vacuuming remember to never allow the soil storage bag to become too full or dirt may escape the vacuum.
Even though vacuuming removes a lot of soil, oily substances deposited on the rug also pose a problem. If left to pile up, these oils cause matting due to the pile sticking together. Gradually the rug starts to form ridges and the colors dim. If not removed when first noticed, it becomes hard to clean. It is, thus, advised to clean your rug when dullness first starts to appear. There are many ways to clean your rug but almost all require clean clothes or paper towels, warm water and a cleaning substance.
About the author:
This article is all about cleaning your valuable carpets and rugs, the importance of cleaning through various methods etc. Carpet Cleaning Los Angeles and Rug Cleaning Manhattan are such professional carpet cleaners giving you all the aids in cleaning your carpets, rugs, mattresses and upholstered furniture.
By Max MichaelOne of the most difficult decisions when it comes to the redecorating of any room is the flooring. With so many different flooring types available and the wide range between costs, it can be more than a little confusing making any final decisions. By learning more about the different flooring types available, everything from cheap laminate flooring to high quality walnut flooring, you can become more familiar with the different flooring types and make the right choice in flooring for your own home.
Obviously the main benefit of the cheaper flooring is it is less expensive than most other flooring types. Laminate floors can look nice and they are really easy to install. However, the problem with laminate is it can look cheap and it is not as durable as other flooring types. Laminate is not the best at standing up to wear and tear so you basically get a few good years with a laminate floor even with proper maintenance.
With other flooring types such as the walnut floors, they do look much nicer and also last longer. They are more expensive but it is more of an investment and you know you are not going to need to perform as much maintenance or redo the floor again a few years down the road. The walnut hardwood floors are gorgeous when installed properly. You may want to hire a professional flooring company to install the floors for you if you have not done it before, as it can be a tricky process.
It all depends on the amount of money you have to work with, what your personal preference is and what sort of look you are trying to achieve in a room. Compare the options you have available and come to a decision on which is right for you.
About the author:
I am an expert in everything floor related. I have worked in construction as well as interior design for more than a decade. If you have any questions feel free to leave a comment and I will get back to you ASAP.
By Joe WallisThese days, tiles are used in more than just kitchen and bathroom projects. There are many different types of tiles, some of which can be installed both indoors and outdoors. Some are extremely versatile, and can be used just about anywhere.
Before choosing tile, it’s important to learn about the different types and their uses. Whether you want to simply remodel one room in your home or renovate an entire building, here is an overview to 10 different tiles and their uses.
Ceramic tiles are forged from rich clay gathered from deep within the earth. Ceramic has an elegant, yet natural appearance, and the tiles are typically glazed in a matte or satin finish. You can also choose unglazed, or “quarry” tiles, if you prefer a more natural look.
Ceramic tile is usually found in residential kitchens and bathrooms. It can be used for flooring, walls, and countertops. If you’re looking for an extremely durable material that can withstand scratches and stains, then you might want to consider buying ceramic tile.
Marble is extremely elegant. It comes in a variety of colors, with the most common being white, pink, gray, and black. The finish can be either matte or polished. This tile is ideal for countertops and walls in kitchens and bathrooms. Many sinks and vanities are made out of marble as well. Polished marble is not ideal for bathroom floors, as it gets slippery when wet. If you
want to buy marble flooring, be sure to choose tiles with a honed (matte) finish.
Vinyl tile is both durable and low-cost. As such, it’s a popular flooring material in high-traffic rooms. Not only is it resilient to impact damage, it is also supple and comfortable to walk on. As long as they are installed properly, vinyl tiles don’t need a lot of maintenance. It’s ideal for residential flooring and commercial flooring both. If you’re going for an antique look, you can buy vinyl tile that is designed to resemble wood or stone.
Granite is a common building material. It has been used for centuries in both indoor and outdoor applications. It’s a very hard stone that is water and scratch-resistant. Since it doesn’t conduct heat, it can go anywhere in the kitchen. It can also be used for outdoor building projects, such as storage building construction and paving. Granite was even used to construct Mount Rushmore! You can choose granite tile in a variety of finishes, including sandblasted, flamed, honed, and polished.
Porcelain is known for its beauty and durability. It’s easy to maintain and is available in different colors and textures. Porcelain tile is very frost-resistant, and therefore suitable for bathroom furniture, flooring, and walls. Some small
businesses also use porcelain tile since it holds up pretty well as light commercial traffic. Porcelain tile is available in high-polished, matte, and unglazed finishes.
Slate has a rough texture and rustic appearance. However, it still scratches and stains easily, making it a bad choice for kitchen countertops. What it lacks in durability, slate makes up for in versatility. You can use it for interior and exterior projects. Some indoor uses for slate tile include bathroom and
kitchen flooring, walls, and indoor sunrooms. For the outdoors, you can use it as building material for a patio or porch.
Mosaic tile is very translucent, beautiful, and versatile. It is produced in many different colors and textures. This makes it a perfect design for just about any renovation project. Mosaic looks great in bathrooms, kitchens, around pools, bathtubs, and even walls. Some manufacturers even create mosaic tiles for
artistic projects. A lot of artists use this material in their arts and crafts.
Travertine is a stone tile that is used in a variety of residential applications. It’s easy to cut for a stone; therefore, it can be cut to fit any type of area. In addition to flooring, travertine tile can be used on kitchen countertops sinks, in showers, and for fireplaces. For outdoor applications, it can be used as a garden path or patio. Travertine is rather porous and quickly absorbs liquids. For this reason, you need to wipe up spills as soon as they happen. Also, you need to be careful in regards to the cleaning products you use.
Laminate looks like hardwood, yet no wood is used in its construction. Laminate tiles are made up of a variety of materials which are bonded together under high pressure. They are topped with a photographic image of hardwood flooring, followed by a hard, clear coating. Laminate is an ideal choice if you want an inexpensive alternative to a wood floor. It can be installed in just about any room in your home, save for the bathroom and laundry room. This is because laminate tiles can swell when exposed to a lot of moisture.
Linoleum is a great looking tile that looks attractive in both contemporary and traditional settings. Linoleum floors can last for a very long time, and don’t require a lot of maintenance. It’s extremely water-resistant, so you can put it in your bathroom, laundry room, patio, and just about any other indoor or outdoor setting. The downside to linoleum is that it doesn’t do well around heat, so avoid using it near a stove or fireplace.
About the author:
Joe Wallis is the editor of the Learn How to Lay Tile website, which provides information about how to choose tile and set it properly for a wide variety of home improvement projects.